M4F IT Solutions

If you upgraded your motherboard and CPU to a brand new one, you might encounter with some RAM problems. Either the system seems slower or the total amount of RAM is displayed less than the actual amount during bootup (when you just power-up the computer).

The problem usually occur if you upgraded from a 486 to a Pentium or from non-EDO RAM to EDO. There are a few things...

A world without sound is boring. The same goes to computers. Imagine playing quake with the beeps from the computer speaker. The sound card is a piece of hardware to generate high quality sound. It enables your to listen to your CD, record voices with the microphone and playing your sound files.

Don't Throw Away Your Old RAM

If you have and old PC that utilizes old 32 bit RAM, don't...

The maximum a floppy disk can contain is 1.44 MB. To play a game with around 200 MB you are stuck with 100 over diskettes. The CD-ROM is a revolutionary invention that allows up to 625 MB at one time. However, it is read only, which means you can't store in anything.

Buttons Fun

Although most CD-ROMs comes with only 2 buttons, do you know you can also skip, play previous...

The graphic card is one of the most important pieces of hardware in your PC. Without it, your super monitor with all the bells and whistles is just a junk box.

Make Directional Input

Most video cards come with simple frame capture programs, but you'll have to do some programming if you plan to integrate video capture with other operations on your computer, such as adding text data...

A sunset, especially at sea, can be an amazing color spectacle. The hues will depend heavily on the weather, though — but you can push them a bit with a gradient map. Click on the “New Fill/Adjustment Layer” button in the Layer palette and select “Gradient Map” from the list. Click on the gradient to open the “Gradient Editor.”

Gradient Map

Click on the first color patch below the gradient, and change the color to red. Set the color patch on the opposite side to yellow, and ...

To increase detail in landscape shots, boost the mid-tone contrast. Copy the background layer with Control/Command + J, and then click on Filter → Convert for Smart Filters in the menu. Then go to Filter → Other → High Pass and enter a radius of 3 pixels. Change the blending mode to “Overlay” and double-click the layer next to its name to open the “Layer Style” window.

Layer Style window: This Layer

For the first gradient, “This Layer,” split the sliders by holding the Alt...

Go to the Layer menu, and then New Adjustment Layer → Hue/Saturation, and set the blending mode to “Soft Light” and check “Colorize.” Use the Hue, Saturation and Lightness sliders to control the color: for a cool look, for example, set the hue at 210, the saturation at 50 and the lightness at 10; for a warm look, set the hue at 30, the saturation at 30 and the lightness at 5.

Here is Hue/Saturation and Color Fill.

Alternatively, you could use several color layers. Create them fr...

When applying a “Levels adjustment,” you can set black and white points in order to decrease color tints, but where are the darkest and brightest spots in the image? Go to New Adjustment Layer → Threshold to find those areas. This function is available under the “Layer” menu.

Move the slider so far to the right that only a few white spots remain in the document. Use the “Color Sampler tool” and set down a point there. Move the slider to the left until only a few black spots...

Open a photo in Camera Raw; you can do this either in Bridge, using the right mouse key and clicking “Open in Camera Raw,” or directly in Photoshop, by selecting File → Open as Smart Object. Apply basic adjustments to optimize your image (for example, with the “Recovery” and “Fill Light” slides), then switch to the “HSL/Grayscale” tab. Check “Convert to Grayscale,” and set the Blues down to around -85. Set the Greens to +90 and the Yellows to +20.

Trees and bushes s...

The light of the sun creates texture. There are shadowy areas and spots where the sunlight can shine without interference. To control the intensity, you can draw more light onto a separate layer or increase already existing light. Create a new layer by going to Layer → New → Layer, or by pressing Shift + Control + N on Windows or Shift + Command + N on a Mac. Set the blending mode to “Color Dodge” and the opacity to about 15%.

Increase light on a separate layer.

Then use the brush t...